EPS Industrial Oil Skimmer

About EPS Industrial Oil Skimmer

EPS Industrial Oil Skimmer (CSE-01) is a mechanical oil skimmer made by EPS Denizcilik ve Çevre Hizmetleri, made of marine grade aluminum, used to recover oil and petroleum-based liquids spilled or leaked on the water surface in the sea, lakes and similar bodies of water such as ponds. It is a well-established model used worldwide against pollution caused by petroleum-based substances.

Material and Dimensions

Body material: Marine Grade Aluminum (corrosion-resistant, seawater-grade aluminum)
Dimensions: Ø 75 cm diameter, 7 cm thickness (custom sizes available on request)

Working Principle

The skimmer works using the density difference between oil and water, using the resulting head difference to perform mechanical skimming. Oil, being lighter than water, rises to the surface and is drawn into the skimmer head through the suction channels according to the thickness of the oil layer, then separated from the water and pumped out through the discharge hose. Skimming capacity is 20 m³/hour, recovering high-viscosity oil/petroleum accumulations from the water surface.

The system can also be used as a transfer unit for pumping petroleum-based fluids.

Skimmer Set

7 m Suction hose
7 m Discharge hose
1 x Skimmer head
1 x Diesel or electric vacuum pump
Optional hose floater

Electric Motor Model: EPS-CSE01 Pump Specs

Pump type	2″ Aluminum diaphragm pump
Max pressure	2 bar (0.2 MPa, 29 psi)
Power supply	380V 50Hz
Max power	3 kW/h
Volume per cycle	4.38 lt/cycle
Max discharge height (for water)	20 m
Max suction depth	5 m
Max solids size	4.5 mm
Sound level	90 dBA
Max flow rate	333 lt/min
Max cycles	76 cycles/min
Max liquid temperature	80°C
Ambient temperature range	5-40°C
Inlet / Outlet	2″ / 2″
Body material	Aluminum
Diaphragm material	NBR

Frequently Asked Questions

How does EPS Industrial Oil Skimmer work?
It uses the density difference between oil and water to perform mechanical skimming, drawing the oil layer on the water surface into the suction channels and separating it from the water with a pump.

What is its skimming capacity?
It recovers high-viscosity oil/petroleum accumulations from the water surface at a rate of 20 m³/hour.

Is a diesel-powered model available?
Yes; alongside the electric motor EPS-CSE01 model detailed on this page, a diesel-powered model option is also available – contact us for details.

What material is it made from?
It is made from corrosion-resistant Marine Grade Aluminum; standard diameter is 75 cm and thickness 7 cm, with custom sizes also available.

Can it be used for anything other than oil recovery?
Yes; the system can also be used as a transfer unit for pumping petroleum-based fluids.